Some Fort Worth spaces are hard to cool well with central air: a converted garage, a sunroom, a new addition, or an older home that never had ductwork. In the Census tract that covers most of Fairmount, for example, 65.6 percent of homes were built in 1939 or earlier. A ductless mini-split solves it with quiet, zoned heating and cooling and no ducts required. We design and install the right system for your space, with an upfront price and our 100% satisfaction guarantee.
A mini-split has an outdoor unit and one or more indoor heads mounted on a wall or ceiling, connected by a small refrigerant line that runs through a hole a few inches across. There is no ductwork to build, which is why it suits additions and older houses. Each indoor head runs on its own, so you heat or cool only the rooms in use.
Mini-splits are heat pumps, so the same system cools in summer and heats in winter. ENERGY STAR says certified mini-split heat pumps use up to 60 percent less energy than standard electric radiators, because they move heat rather than generate it. If a room is heated today with a space heater or electric baseboard, that comparison is the one that matters.
| Setup | Best for |
|---|---|
| Single-zone: one outdoor unit, one indoor head | One room, an addition or a garage |
| Multi-zone: one outdoor unit, several indoor heads | Several rooms, each with its own temperature |
| Mini-split alongside central air | A house where the ducts cover most rooms but miss one or two |
We recommend the configuration after looking at the rooms, their size, sun exposure and how you use them.
A mini-split that is too big short-cycles and leaves a room clammy; one that is too small runs constantly. Our NATE-certified technicians size every head for its room, place it where the air reaches the space, and run the line set and condensate drain cleanly. The City of Fort Worth requires a permit for work that changes, moves or repairs a home’s mechanical system, and we handle it as part of the install.
Cost depends on the number of zones, the system’s capacity and the install, so we assess your space and give you a clear, written quote with financing before any work begins. Every system is backed by strong manufacturer warranties and our own guarantee. To schedule an assessment, call us at 817-290-3373 or book online. Comparing options for the whole house? A ducted heat pump may be the better fit, and we will tell you which.
Call 817-290-3373 or book online.
It depends mostly on how many indoor heads you need and the system’s capacity. A single-zone install costs far less than a multi-zone system. We give you an upfront written quote with financing after assessing your space.
A single-zone unit is ideal for one room or area. To condition several rooms, a multi-zone system uses one outdoor unit with several indoor heads. We recommend the right configuration for your home.
Yes. They are one of the best options for homes without ductwork, because they avoid invasive duct installation and give room-by-room comfort.
Yes. Mini-splits are heat pumps. ENERGY STAR says certified models use up to 60 percent less energy than standard electric radiators, because they move heat rather than generate it.
Fort Worth requires a permit for work that changes, moves or repairs a home’s mechanical system, and adding a heating and cooling system changes it. We handle the permit as part of the install.
Same day appointments across Fort Worth & Tarrant County. Fully-stocked trucks, friendly uniformed techs, upfront flat-rate pricing, call now and we’ll be there.