Same Day Service Available in Fort Worth

Whole-Home Generator Installation in Fort Worth, TX

Standby generator on a concrete pad beside a house
Backup Power

Keep the House Running When the Grid Does Not

A summer heat wave or a hard winter freeze is exactly when losing power hurts most in Fort Worth. A whole-home standby generator starts on its own when the grid drops and keeps the air conditioning, the heat, the refrigerator and medical equipment running until power returns. Our licensed electricians size, install and service standby generators with an upfront price and financing.

Why Fort Worth Homeowners Add a Generator

  • Cooling and heating that keep running through an outage
  • Refrigerated food and medication that stay cold
  • Power for medical equipment and a home office
  • Automatic start, with no extension cords and no one going outside in a storm

The Part That Keeps Everyone Safe: the Transfer Switch

How a generator connects to the house matters as much as the generator itself. The U.S. Consumer Product Safety Commission has warned people to stop using “male-to-male” extension cords, the cords some homeowners use to push generator power back into the house through a wall outlet. The CPSC explains that the exposed prongs carry live current, and that feeding power backward through an outlet goes around the safety features of the home’s electrical system and can start a fire.

A standby generator avoids all of that. It connects through a transfer switch that separates the house from the utility line before the generator takes the load, so power only flows the way the system was built for. We install the switch, the wiring and, for natural gas units, the gas connection as one job.

Sized to What You Actually Need to Run

A generator that is too small will not carry your essentials, and one that is too big costs more than it needs to. Before we quote, we go through what you want running in an outage:

What you want covered What that usually means for sizing
The refrigerator, some lights, outlets and the internet An essentials-only system on a few circuits
The above plus central air or a heat pump A larger unit, because starting the air conditioner is the biggest single load
Everything, as if nothing happened Whole-home capacity matched to the panel
A medical device that cannot stop That circuit first, whatever else is covered

Then we recommend a capacity, show you the price in writing and explain what the unit will and will not carry.

Permitted and Inspected Under Fort Worth’s Code

The City of Fort Worth requires a permit for work that changes a home’s electrical system, and since September 1, 2026 the city enforces the 2026 National Electrical Code with local amendments. A standby generator adds a transfer switch and new circuits, and a gas unit adds fuel piping as well, so the work is permitted and inspected. We pull the permits and see the job through inspection.

Newly installed Generac standby generator along a brick wall
Generac standby generator beside its propane tank and transfer switch

Upfront Pricing, Financing and Service After the Install

Generator cost depends on capacity, fuel type, your panel and how far the unit sits from the gas meter and the panel. We look at the house and give you a written quote with financing before any work begins. We also service and maintain the generators we install. If the lights are out because of a fault inside the house rather than the grid, our 24/7 emergency electrical service can get a technician moving. Pairing a generator with whole-home surge protection, or with a panel upgrade if the panel has no room, is easy to do in the same visit.

To get a quote, call us at 817-290-3373 or book online.

Get a Generator Quote

Call 817-290-3373 or book online.

FAQs

Frequently Asked Questions

It depends on what you want running: essentials only, essentials plus central air, or the whole home. Starting the air conditioner is usually the biggest load. We go through your list and size the generator to it, so it carries your load without overspending.

No. The CPSC warns against the male-to-male cords used for that, because the exposed prongs carry live current and back-feeding an outlet bypasses the home’s electrical safety features and can start a fire. A transfer switch is the safe way to connect.

Yes. Fort Worth requires a permit for work that changes a home’s electrical system, and a gas-fired unit adds gas piping too. We pull the permits and handle the inspection.

It varies with capacity, fuel type, your electrical setup and the gas connection. We look at your home and give you an upfront written quote with financing before any work begins.

Yes. We service and maintain the generators we install, so the unit is ready when the next outage comes.

โ—† Help Is On The Way

The Astar Truck Will Be at Your Curb Today.

Same day appointments across Fort Worth & Tarrant County. Fully-stocked trucks, friendly uniformed techs, upfront flat-rate pricing, call now and we’ll be there.

24/7 emergency line Read our Google reviews
817-290-3373
Astar service van in the company's blue and red wrap
Avg. ETA < 90 minin Fort Worth