Every circuit in the house starts at the electrical panel. When it is old, full or overloaded, you get tripped breakers, a panel that runs warm and no room for what you want to add, such as central air, an EV charger or a hot tub. Our licensed electricians upgrade and replace panels across Fort Worth safely, to code and fully permitted, with an upfront price and our 100% satisfaction guarantee.
| What you are seeing | What it usually points to |
|---|---|
| Breakers that trip often, or a panel that feels warm | A panel or circuits carrying more than they should |
| Plans for an EV charger, hot tub, addition or central air | A new load the panel may not have room for |
| A 60 to 100 amp panel in a household with modern appliances | A service size that may be too small for today’s loads |
| Fuses instead of breakers, or no open slots | An older panel with no room for new circuits |
| A Federal Pacific or Zinsco label on the panel | A panel worth having inspected |
A panel that sparks, smells of burning or feels hot is not a scheduled upgrade: switch off the main if you can do it safely and call our 24/7 emergency electrical service.
If your Fort Worth home was built or rewired roughly between the 1950s and the 1980s, the panel may carry a Federal Pacific or Zinsco label. If you see either name, have the panel inspected. We look at its condition, the breakers and the loads it carries, then give you a straight recommendation on whether to keep it or replace it, with an upfront price either way.
A Level 2 EV charger draws power for hours at a time, and the U.S. Department of Energy notes that some homes do not have enough electrical capacity for one without changes. The same question comes up with a new central air system, a heat pump or an addition. Before you buy the new equipment, we work out the load the house already carries and what the new one adds, then tell you whether the panel can take it, needs new circuits or needs to be upgraded.
The City of Fort Worth requires a permit for work that changes a home’s electrical system, and a panel upgrade or replacement is exactly that. The city adopted the 2026 National Electrical Code, with local amendments, effective September 1, 2026, so a panel installed today goes in under the current code. We pull the permit, do the work and see it through inspection, so the upgrade is safe and documented when you sell the house.
Cost depends on the new amperage (for example, moving to 200 amps), the condition of the wiring, whether the utility service needs to change and whether an older panel needs full replacement. We evaluate the home and give you a clear, upfront quote with financing before any work begins. If you are adding an EV charger, we can quote the charger with the panel, and whole-home surge protection installs at the new panel in the same visit.
Call us at 817-290-3373 or book online to schedule an evaluation.
Call 817-290-3373 or book online.
It depends on the amperage you move to, the home’s wiring, whether the utility service changes and whether an older panel needs full replacement. We evaluate your home and give an upfront quote with financing before any work begins.
If your panel carries either name, have it inspected. We check its condition, the breakers and the loads it carries, then recommend whether to keep it or replace it, with an upfront price either way.
Yes. Fort Worth requires a permit for work that changes a home’s electrical system. We pull the permit, do the work to the 2026 code the city now enforces and see it through inspection.
Maybe. A Level 2 charger is a large load that runs for hours, and some homes do not have the capacity without changes. We check the panel and the existing load first and quote any needed work upfront.
It depends on what the house runs now and what you plan to add. Many upgrades move to 200 amps, but we size the panel to your load rather than guessing.
Same day appointments across Fort Worth & Tarrant County. Fully-stocked trucks, friendly uniformed techs, upfront flat-rate pricing, call now and we’ll be there.