North Texas storms and an unpredictable grid can send surges through a house that damage electronics, appliances and the controls in your air conditioner and smart devices. Whole-home surge protection mounts at the electrical panel and stops a surge before it spreads through the wiring. Our licensed electricians install it across Fort Worth quickly and to code, with an upfront price.
The National Weather Service counts about 25 million lightning strikes a year across the United States, and North Texas gets its share of thunderstorms. The Weather Service’s own safety advice is a reminder of how lightning gets into a house: a home is a safe place in a storm only if you stay away from things that conduct electricity, including corded electrical devices, wiring and plumbing. The same wiring that carries a strike’s energy toward you carries it toward everything connected to the panel. Storms are not the only cause, either: outages and the moment power comes back can send surges through the house too.
| Plug-in surge strip | Panel-mounted whole-home protector | |
|---|---|---|
| What it protects | The devices plugged into it | The whole electrical system from the panel out |
| Hardwired equipment (AC, oven, water heater, lighting) | Not covered | Covered |
| Where it goes | At the outlet | At the electrical panel, installed by an electrician |
| Best use | Extra protection on sensitive electronics | The first layer for the whole house |
For layered protection, we often pair the panel protector with point-of-use protectors on televisions, computers and home office equipment.
Today’s houses have more electronics in them than ever, and many are not plugged into anything you can unplug before a storm: the control board in the air conditioner and furnace, the oven, the dishwasher, smart thermostats, the garage door opener, lighting and the circuits feeding a home office. A panel-mounted protector covers those hardwired loads that a strip cannot reach.
Surge protection installs at the panel, so it fits naturally with other electrical work. If you are upgrading the panel, adding a whole-home standby generator or installing an EV charger, adding surge protection in the same visit saves a second trip. Because the device connects inside the panel, the work is done by a licensed electrician and, where Fort Worth’s permit rules apply to the change, permitted.
It is one of the more affordable electrical upgrades, and the exact price depends on your panel and the protector it needs. We give you a clear, upfront price and install it safely. To schedule, call us at 817-290-3373 or book online.
Call 817-290-3373 or book online.
If you want to protect appliances, electronics and air conditioning controls from storms and grid surges, yes. A protector at the panel guards hardwired equipment that plug-in strips cannot, which makes it worthwhile for most homes.
No. A power strip protects only what is plugged into it. A panel-mounted device protects the whole electrical system, including hardwired appliances and the air conditioner. The two work best together.
Yes. The National Weather Service tells people indoors during a storm to stay off corded electrical devices and away from wiring and plumbing, because lightning can travel through them. Surge protection at the panel limits what reaches the equipment connected to it.
It is one of the more affordable electrical upgrades, though the exact price depends on your panel and the protector. We give you an upfront quote before any work starts.
Yes, and it is the easiest time to do it. The protector mounts at the new panel during the same visit.
Same day appointments across Fort Worth & Tarrant County. Fully-stocked trucks, friendly uniformed techs, upfront flat-rate pricing, call now and we’ll be there.